Zünd Felt Conveyor Belt S3 L-1600 – 1880 × 10590 mm

1880 × 10590 mm felt conveyor belt for the Zünd S3 L-1600. Available in 2.5 mm / 3 mm / 4 mm. Splice cut free; belt ships open-ended and is joined into a loop on the machine. Grey, white, green or custom colour.

Brand: Stak Item No. STAK-FB-ZUN-10590X1880 Categories , ,

Shipping Methods : By sea Or Air

Share Product :

Facebook
Twitter
LinkedIn
Pinterest

Description

Zünd felt conveyor belt, 1880 × 10590 mm

Replacement felt conveyor belt for the Zünd S3 L-1600. Supplied at 1880 mm wide and 10590 mm long, in 2.5 mm or 3 mm or 4 mm.

Specifications

Brand Zünd
Machine model S3 L-1600
Length 10590 mm
Width 1880 mm
Thickness 2.5 mm / 3 mm / 4 mm
Construction needle-punched felt, double-sided nap; mesh-reinforced grade for long tables
Splice cut free of charge, 10 standard profiles or your own drawing
Colours Grey / White / Green / Custom Colour
Supply form open-ended, joined into a loop on site

What decides the fit

Length and width are the two numbers that matter. Cut the old belt at the splice, lay it flat and measure the full length end to end and the width. Thickness is measured with a caliper in three places — thickness is a separate choice and is not encoded in the part number.

Splice and installation

The belt arrives open-ended with the splice teeth already cut, because a closed loop cannot be passed around the table frame. You join it on the machine. Ten standard splice profiles are cut free of charge, and a profile cut to your drawing costs nothing extra. We do not ship adhesive — solvents are restricted in air and sea freight — but we will tell you which contact adhesive to buy locally.

Colours

Grey, white, green, or a custom shade matched to your machine. Colour has no effect on airflow or felt grade.

FAQ

Does the Zünd S3 L-1600 felt conveyor belt fit my machine?

This belt is listed for the Zünd S3 L-1600 at 1880 × 10590 mm, in 2.5 mm / 3 mm / 4 mm. Width and length are the two numbers that decide fit — check them against your old belt before ordering. If your machine has an extension module fitted, tell us which one and we will confirm the length.

Which thickness should I order for the Zünd S3 L-1600 felt conveyor belt?

The 1880 × 10590 mm belt for the Zünd S3 L-1600 is supplied in 2.5 mm / 3 mm / 4 mm. Thickness is not encoded in the OEM part number, so it has to be chosen separately: measure the old belt with a caliper in three places and order the closest grade, or tell us your machine model and we will confirm. Running a different thickness changes the height of the cutting surface above the vacuum chamber.

Does the Zünd S3 L-1600 felt conveyor belt arrive as a closed loop or open-ended?

Open-ended, with the splice teeth already cut. A closed loop cannot be fitted around the Zünd table frame, so the belt is supplied flat and joined on the machine during installation. The splice profile is cut to match what the machine was built for, and cutting it is free.

Can I order the Zünd S3 L-1600 felt conveyor belt in another colour?

Yes. This belt is available in grey, white, green, or a custom shade matched to your machine. Colour does not change the felt grade or the airflow, so choose it for how the belt reads on the table — light colours show registration marks and cut lines better, dark colours hide ink and dust. Custom colours are dyed to your sample.

What is the MOQ for the Zünd S3 L-1600 felt conveyor belt?

One piece. There is no minimum order for the Zünd S3 L-1600 felt conveyor belt, and a single belt is cut to your width and length with the splice of your choice. If you want a spare, order two — the second costs less in freight than a separate shipment later.

How is the Zünd S3 L-1600 felt conveyor belt delivered?

By air or by sea, whichever you prefer. To keep freight cost down, we recommend ordering enough to fill a 20 ft or 40 ft container; send us the quantity you need and we will work out exactly how many belts fill it, based on their packed size and weight. Small orders go by air courier.

What is the delivery time for the Zünd S3 L-1600 felt conveyor belt?

If the material is in stock, we dispatch in about 3–7 days. If it has to be produced, allow about 10–15 days. The lead time is confirmed again against the exact quantity and the finished width and length.

Can I buy one large roll of the Zünd S3 L-1600 felt conveyor belt and cut it myself?

Yes. We can supply the belt material as a full roll or as a sheet cut to your width, without the splice. Tell us the roll width and the total length you want and we will quote that instead of a finished belt. Cutting and splicing in your own workshop is common for users who keep several tables running.

What guarantee do you give on the Zünd S3 L-1600 felt conveyor belt?

If the belt is defective when it arrives — wrong dimensions, a fault in the felt, or a splice that was cut incorrectly — send us a video showing the problem and we will replace it free of charge. Felt is a consumable: it wears with use, and normal wear after the belt has been in service is not a manufacturing fault, so it is not covered by the replacement guarantee.

Additional information

Brand

Zünd

Machine Model

S3 L-1600

OEM Part No.

—

Thickness

2.5 mm, 3 mm, 4 mm

Colour

Grey, White, Green, Custom Colour

Splice

Cut free — 10 standard profiles or your drawing

Reviews

There are no reviews yet.

Be the first to review “Zünd Felt Conveyor Belt S3 L-1600 – 1880 × 10590 mm”

Your email address will not be published. Required fields are marked *

Download Catalog

Download our cutting machine spare parts catalog to browse products and part numbers. Contact us to confirm compatibility with your machine.

Thank You

Download Catalog

Note: Your email information will be kept strictly confidential.