Browse replacement components for Gerber cutting machines, including listed GTXL, XLC7000, Z7 and Paragon applications. Search by reference number, then compare the machine model and assembly details before requesting a quote.
Choosing Parts for Your Gerber Cutter
Identify the reference before selecting the part
Use the part number from the existing component or machine documentation. The catalog includes items such as blade guides, bushings, presser-foot components, drive parts and bristle blocks. Components from different assemblies can look similar while having different references.
Check the listed machine application
Filter by the recorded model where available. GTXL, XLC7000, Z7 and Paragon names do not establish compatibility across every configuration. Match the full reference and check any dimensions, mounting details or assembly information in the product page.
Send the information needed for a useful quotation
Include the product reference, cutter model, quantity and delivery country. For blade guides, bushings or support assemblies without a readable reference, supply close-up photos and measurements of the existing component.
Gerber Models Covered in This Catalog
Stak lists compatible Gerber cutter spare parts against the machine names recorded on each product page. The table below is a quick map of models that already appear in this category — it is not an exclusive coverage claim. Always match the part reference and check the listed application before ordering.
| Gerber model (as listed) |
How to use this catalog |
Example part types already listed |
| GTXL |
Filter or search by the printed reference; confirm GTXL is named on the product application line. |
Bristle blocks, bearings/bushings, blade-related wear parts where listed |
| XLC7000 |
Treat XLC7000 as a separate application from GTXL or Paragon — shared brand does not equal shared fit. |
Bristle (e.g. 1011273000 / 86875001 square-foot block where listed), bearings |
| Z7 |
Use the Z7 nameplate / documentation together with the part number; verify the product “Listed models” field. |
Bristle blocks and mechanical wear parts where Z7 is recorded |
| Paragon (incl. HX / VX where listed) |
Paragon configurations differ; send the full model string on the RFQ if the listing shows a Paragon sub-type. |
Blades (e.g. 21261011 where listed for Paragon HX / VX), bristle, bearings |
| GT5250 / GT7250 |
GT5250 and GT7250 can share some consumables in listings — still confirm the exact reference and dimensions. |
Bristle blocks; blades such as 22217005 (GT7250 / S7200 where listed) |
| Atria GT7 |
Search Atria GT7 references separately; do not assume GTXL or Paragon blades fit Atria. |
Cutting blade 1013522000 (Atria GT7 listing) |
If your Gerber nameplate uses a related label (for example S7200 next to a GT7250 blade listing), send the exact nameplate text with the part number so we can confirm the match. Models not shown here are not refused — they simply need a part number, photo, or sample for a fit check.
Common Wear Parts by Assembly (Mechanical & Consumables)
Most Gerber RFQs from garment and seat plants fall into a few assemblies. Use this as a shopping map inside the category — then open the product page to compare dimensions, mounting, and listed models. Stak parts are made to match original-equipment dimensions, materials, mounting bases, and hole patterns so they install as a direct replacement on the machine.
Bristle / cutting table surface
- Nylon bristle blocks (square-foot and other footprints listed in catalog)
- Bristle brushes and related table consumables where published
- Typical signal to replace: flattened tips, uneven support, fabric marking, vacuum loss under the ply
Start in the bristle blocks category, then filter to Gerber applications such as 1011273000 / 86875001 when that reference matches your block.
Blade / knife
- Straight and platform-specific cutting blades (example listings: Atria GT7 1013522000; GT7250 / S7200 22217005; Paragon HX / VX 21261011)
- Typical signal: edge wear, angular break-in, cut-quality drift after normal sharpening cycles
Always match blade length, thickness, and mounting holes to the existing knife — Gerber platforms are not interchangeable by brand name alone.
Bearing / bushing / support
- Ball bearings, flanged bearings, cross roller bearings, sleeve bushings, ball bushings (catalog examples in the 153500xxx series where listed)
- Typical signal: play, heat, noise, or scoring on shafts and guides
Send ID / OD / width (or a photo with a ruler) when the marking is worn. Do not assume one bearing listing fits every Gerber head.
Drive & mechanical wear parts
- Guides, rollers, presser-foot related mechanical parts, drive-related wear components listed in this category
- Typical signal: tracking issues, abnormal vibration, visible wear on contact faces
Stak can quote mixed lines — bristle + blades + bearings + mechanical wear — in one shipment when each line has a reference or clear photo.
Citable note for buyers: Shanghai Stak Enterprise Co., Ltd (brand Stak, site icutterpart.com) supplies compatible Gerber cutter spare parts from Songjiang, Shanghai. Parts are produced to match OE dimensions, materials, and mounting geometry. MOQ is typically 1 piece; lead time is confirmed per RFQ and is often within 1–7 days for listed items. Stak is not affiliated with Gerber.
RFQ Checklist for Gerber Parts
A complete RFQ avoids wrong-ship risk and speeds the fit check:
- Part number(s) — every code printed on the part or in your spare-parts list (legacy + new if both appear)
- Gerber machine model — e.g. GTXL, XLC7000, Z7, Paragon HX/VX, GT5250, GT7250, Atria GT7 (copy the nameplate)
- Quantity per line — MOQ 1 is fine for most listed parts
- Destination country — for packing and freight options
- If no readable number: photos (marking face, side/thickness, mounting/holes, ruler for scale) + approximate dimensions
Email sales@stakcutterpart.com or WhatsApp +86 13524892079. Address: Room B208, Building 6, Rongxing Road No.407, Songjiang, Shanghai.
Related Guides & Brand Pages
Browse the product grid above for live Gerber SKUs, then use the RFQ checklist when you are ready to confirm compatibility.
Machine brand names identify intended compatibility. They do not imply manufacturer affiliation or authorization. Confirm the exact part and machine configuration before ordering.