Description
Bullmer felt conveyor belt, 5000 × 5800 mm
Replacement felt conveyor belt for the Bullmer. Supplied at 5000 mm wide and 5800 mm long, in 3 mm or 4 mm.
Wide belt: this width is built from two felt panels bonded edge to edge, because a single sheet is limited to 3,500 mm.
Specifications
| Brand | Bullmer |
|---|---|
| Length | 5800 mm |
| Width | 5000 mm |
| Thickness | 3 mm / 4 mm |
| Construction | needle-punched felt, double-sided nap; mesh-reinforced grade for long tables |
| Splice | cut free of charge, 10 standard profiles or your own drawing |
| Colours | Grey / White / Green / Custom Colour |
| Supply form | open-ended, joined into a loop on site |
| Wide belt | built from joined panels (single sheet max 3,500 mm) |
What decides the fit
Length and width are the two numbers that matter. Cut the old belt at the splice, lay it flat and measure the full length end to end and the width. Thickness is measured with a caliper in three places — thickness is a separate choice and is not encoded in the part number.
Splice and installation
The belt arrives open-ended with the splice teeth already cut, because a closed loop cannot be passed around the table frame. You join it on the machine. Ten standard splice profiles are cut free of charge, and a profile cut to your drawing costs nothing extra. We do not ship adhesive — solvents are restricted in air and sea freight — but we will tell you which contact adhesive to buy locally.
Colours
Grey, white, green, or a custom shade matched to your machine. Colour has no effect on airflow or felt grade.
FAQ
What machine does the Bullmer 5000 × 5800 mm felt conveyor belt fit?
This belt is listed for the Bullmer at 5000 × 5800 mm, in 3 mm / 4 mm. Width and length are the two numbers that decide fit — check them against your old belt before ordering. If your machine has an extension module fitted, tell us which one and we will confirm the length.
Which thickness should I order for the Bullmer 5000 × 5800 mm felt conveyor belt?
This belt is supplied at 5000 × 5800 mm in 3 mm / 4 mm. Thickness is not encoded in the OEM part number, so it has to be chosen separately: measure the old belt with a caliper in three places and order the closest grade, or tell us your machine model and we will confirm. Running a different thickness changes the height of the cutting surface above the vacuum chamber.
Does the Bullmer 5000 × 5800 mm felt conveyor belt arrive as a closed loop or open-ended?
Open-ended, with the splice teeth already cut. A closed loop cannot be fitted around the Bullmer table frame, so the belt is supplied flat and joined on the machine during installation. The splice profile is cut to match what the machine was built for, and cutting it is free.
Can you supply the Bullmer 5000 × 5800 mm felt conveyor belt in a 5000 mm width?
Yes. Both dimensions exceed the 3,500 mm width of a single felt sheet, so this belt is built as two panels of about 2500 mm bonded edge to edge, then spliced into a loop. The bonded seam runs with the belt, not across the cutting area.
What is the MOQ for the Bullmer 5000 × 5800 mm felt conveyor belt?
One piece. There is no minimum order for the Bullmer 5000 × 5800 mm felt conveyor belt, and a single belt is cut to your width and length with the splice of your choice. If you want a spare, order two — the second costs less in freight than a separate shipment later.
How is the Bullmer 5000 × 5800 mm felt conveyor belt delivered?
By air or by sea, whichever you prefer. To keep freight cost down, we recommend ordering enough to fill a 20 ft or 40 ft container; send us the quantity you need and we will work out exactly how many belts fill it, based on their packed size and weight. Small orders go by air courier.
What is the delivery time for the Bullmer 5000 × 5800 mm felt conveyor belt?
If the material is in stock, we dispatch in about 3–7 days. If it has to be produced, allow about 10–15 days. The lead time is confirmed again against the exact quantity and the finished width and length.
Can I buy one large roll of the Bullmer 5000 × 5800 mm felt conveyor belt and cut it myself?
Yes. We can supply the belt material as a full roll or as a sheet cut to your width, without the splice. Tell us the roll width and the total length you want and we will quote that instead of a finished belt. Cutting and splicing in your own workshop is common for users who keep several tables running.
What guarantee do you give on the Bullmer 5000 × 5800 mm felt conveyor belt?
If the belt is defective when it arrives — wrong dimensions, a fault in the felt, or a splice that was cut incorrectly — send us a video showing the problem and we will replace it free of charge. Felt is a consumable: it wears with use, and normal wear after the belt has been in service is not a manufacturing fault, so it is not covered by the replacement guarantee.






Reviews
There are no reviews yet.